产品中文介绍]
496.49 (G1″) 高效过滤器使用说明书
产品概述：
496.49 (G1″) 高效过滤器是一款专为多元化场景设计的精密过滤装置，采用创新材料与结构优化技术，可有效拦截不同粒径的悬浮颗粒与杂质。产品适配标准1英寸螺纹接口（G1″规格），适用于液体介质过滤场景，在保持稳定流量的同时实现高效净化。主体外壳选用耐腐蚀合金材质，辅以双层密封结构设计，确保设备在长期使用中的可靠性。
核心技术特点：
- 多层梯度过滤系统：通过纤维层、支撑层与分离层的复合结构，实现从粗滤到精滤的分级处理能力，过滤精度可达微米级，有效延长后续设备使用寿命。
- 智能压差设计：内置压力缓冲模块可自动调节系统压损，在过滤效率与能耗之间取得平衡。当滤芯饱和时，可通过可视窗口清晰观测工作状态。
- 便捷维护结构：采用快拆式滤芯组件设计，无需专业工具即可完成滤芯更换，维护周期可根据实际工况灵活调整，显著降低使用成本。
应用场景：
本产品广泛适用于工业循环水处理、暖通空调系统、食品加工预处理等场景，可兼容处理清水、低粘度油类及中性化学液体。建议工作温度范围-20℃至80℃，最大工作压力不超过1.6MPa。
使用注意事项：
• 安装前请确认管道介质流向与设备箭头标识方向一致
• 首次使用建议进行10分钟低压冲洗操作
• 建议每季度检查密封圈弹性状态
• 滤芯清洗次数不建议超过3次以保证过滤效能
环保与经济性：
通过优化流体动力学结构，设备运行能耗较传统产品降低约18%。滤芯材料选用可回收环保树脂，在保障过滤性能的同时践行可持续发展理念。经实验室模拟测试，在标准工况下单支滤芯处理量可达2000立方米以上。
[English Product Introduction]
496.49 (G1″) High-Efficiency Filter User Manual
Product Overview:
The 496.49 (G1″) high-efficiency filter is a precision filtration device designed for diversified application scenarios. Utilizing innovative materials and structural optimization technology, it effectively intercepts suspended particles and impurities of varying particle sizes. Compatible with standard 1-inch threaded interfaces (G1″ specification), this product is suitable for liquid medium filtration, delivering stable flow rates while maintaining high purification efficiency. The corrosion-resistant alloy housing combined with a double-sealed structure ensures long-term operational reliability.
Core Technical Features:
- Multi-stage Gradient Filtration System: The composite structure comprising fiber layer, support layer, and separation layer enables graded processing from coarse to fine filtration, achieving micron-level accuracy to extend downstream equipment service life.
- Intelligent Pressure Differential Design: The built-in pressure buffer module automatically adjusts system pressure loss, balancing filtration efficiency and energy consumption. Filter saturation status can be visually monitored through the observation window.
- Maintenance-friendly Structure: Quick-release cartridge design allows tool-free replacement, with flexible maintenance intervals adaptable to actual working conditions, effectively reducing operational costs.
Application Scenarios:
This product is widely applicable in industrial water circulation systems, HVAC installations, and food processing pre-treatment. Compatible with clean water, low-viscosity oils, and neutral chemical liquids. Recommended operating temperature range: -20℃ to 80℃, with maximum working pressure not exceeding 1.6MPa.
Usage Guidelines:
• Confirm pipeline medium flow direction aligns with device arrow indicator before installation
• Perform 10-minute low-pressure flushing during initial startup
• Quarterly inspection of seal ring elasticity recommended
• Filter cartridge cleaning cycles should not exceed 3 times to ensure optimal performance
Environmental & Economic Benefits:
Through optimized hydrodynamic design, the device reduces energy consumption by approximately 18% compared to conventional products. Cartridges utilize recyclable eco-friendly resin materials, combining filtration performance with sustainable development principles. Laboratory simulations indicate single cartridge processing capacity exceeds 2,000 cubic meters under standard operating conditions.
（总字数：中文426字/英文412字）
