TDP1000是美国泰克（Tektronix）公司生产的一款高压差分探头。它具有1GHz的带宽，能够有效捕捉高速信号，满足当今电子设计和测试的需求。TDP1000的差分模式输入电压为±42V（DC + 峰值AC），共模输入电压为±35V（DC + 峰值AC），能够承受高达±100V（DC + 峰值AC）的非破坏性输入电压。其上升时间仅为350ps，可确保在高频测量中的精确性。此外，TDP1000还具备低输入损耗、高输入阻抗（1MΩ）和低输入电容（≤1pF）等特性，能够减少信号失真，提高测量的准确性。它还配备了可选的带宽限制滤波器，可进一步优化测量性能。TDP1000采用人体工学设计，外形轻便，便于在狭小空间内进行操作。它通过TekVPI探头接口直接连接到示波器，使用方便。TDP1000广泛应用于开关模式电源、CAN/LIN总线和高速数字系统设计等领域。

The TDP1000 is a high-voltage differential probe produced by Tektronix, a company based in the United States. It features a bandwidth of 1GHz, which enables it to effectively capture high-speed signals and meet the requirements of modern electronic design and testing. The differential mode input voltage of the TDP1000 is ±42V (DC + peak AC), and the common mode input voltage is ±35V (DC + peak AC). It can also withstand a non-destructive input voltage of up to ±100V (DC + peak AC). With a rise time of just 350ps, the TDP1000 ensures precision in high-frequency measurements. Additionally, the TDP1000 boasts low input loss, high input impedance (1MΩ), and low input capacitance (≤1pF), which help to minimize signal distortion and improve measurement accuracy. It also comes with optional bandwidth limiting filters to further optimize measurement performance. The TDP1000 is ergonomically designed, lightweight, and easy to use in confined spaces. It connects directly to oscilloscopes via the TekVPI probe interface. The TDP1000 is widely used in switch-mode power supplies, CAN/LIN bus, and high-speed digital system designs.