以下是一份4-WE6E/温式电磁换向阀4WE6E的产品中英文介绍：

4-WE6E温式电磁换向阀是一种高性能的液压控制元件，广泛应用于各类液压系统中。该阀采用湿式电磁铁设计，电磁铁内部全封闭且绝缘，衔铁在油中移动，可减少磨损、减缓冲击、提高散热性，从而提高换向和复位的可靠性和使用寿命。其主要由阀体、电磁铁、阀芯及复位弹簧等组成。当电磁铁未通电时，阀芯被复位弹簧保持在中位或起始位置；电磁铁通电时，电磁铁的力经推杆作用在阀芯上，将其推到所需的工作位置，实现液流方向的切换。

该阀具有多种优点。其电磁铁可旋转90度，方便安装和布置。线圈可拆卸，更换线圈时无需放油，大大提高了维修效率。此外，其还具备手动应急操作功能，可在紧急情况下手动推动阀芯。其最大工作流量可达80升/分钟，最高使用压力可达350巴，能够满足多种复杂工况的需求。在应用方面，4-WE6E温式电磁换向阀适用于各种油压系统，如工具机、金属加工成型机械等。

The 4-WE6E solenoid directional control valve is a high-performance hydraulic control component, widely used in various hydraulic systems. It features a wet-type solenoid design, with the solenoid fully enclosed and insulated. The armature moves in the oil, reducing wear, mitigating impact, and enhancing heat dissipation. This design improves the reliability and service life of the valve s shifting and resetting functions. The valve mainly consists of the valve body, solenoid, spool, and reset spring. When the solenoid is not energized, the spool is held in the center or initial position by the reset spring. Upon energizing the solenoid, its force acts on the spool through a push rod, moving it to the required working position to switch the fluid direction.

This valve has many advantages. The solenoid can be rotated by 90 degrees, facilitating installation and layout. The coil is detachable, and there is no need to drain oil when replacing the coil, greatly improving maintenance efficiency. Moreover, it is equipped with a manual emergency operation function, allowing the spool to be manually pushed in emergency situations. It has a maximum working flow rate of 80 liters per minute and a maximum working pressure of 350 bar, capable of meeting the requirements of various complex working conditions. In terms of application, the 4-WE6E solenoid directional control valve is suitable for various hydraulic systems, such as machine tools and metalworking forming machinery.