（中文部分）
E2E-X1R5F2/E2EX1R5F2 非接触式电感接近开关是一款适用于工业自动化场景的检测装置。该产品通过电磁感应原理实现对金属物体的非接触式检测，有效检测距离为1.5mm，可为设备控制系统提供可靠的触发信号。其紧凑型圆柱结构（直径8mm）设计便于在狭小空间安装，特别适用于机械臂末端、装配夹具等精密工位的物体位置检测。

该装置采用全封闭式不锈钢外壳结构，具备良好的机械防护性能，可在存在油污、粉尘等复杂工业环境中稳定工作。核心电路采用优化的振荡电路设计，有效降低环境温度变化对检测精度的影响，工作温度范围覆盖-25℃至+70℃。输出端配置短路保护功能，避免因误接线导致的设备损坏。

产品支持直流供电模式（10-30VDC），兼容多种工业控制系统的电平要求。输出信号采用NPN常开型设计，最大负载电流100mA，可直接驱动继电器、PLC输入模块等工业控制元件。内置状态指示灯可实时显示工作状态，便于设备调试和故障排查。

（English Section）
The E2E-X1R5F2/E2EX1R5F2 is a non-contact inductive proximity sensor designed for industrial automation applications. Utilizing electromagnetic induction technology, this device provides reliable detection of metallic objects within a 1.5mm sensing range. Its compact cylindrical housing (8mm diameter) enables flexible installation in confined spaces, particularly suitable for precision positioning tasks on robotic arm end-effectors and assembly fixtures.

Constructed with a fully sealed stainless steel casing, the sensor demonstrates robust environmental resistance for stable operation in challenging conditions containing oil mist, dust, and particulate matter. The optimized oscillation circuit design ensures consistent detection accuracy across a wide temperature range from -25℃ to +70℃. Integrated short-circuit protection safeguards the device from wiring errors.

Operating on 10-30VDC power supply, this sensor is compatible with various industrial control systems. The NPN normally-open output configuration supports direct connection to PLC input modules and relays with up to 100mA load capacity. The built-in status indicator provides real-time operational feedback, simplifying system commissioning and maintenance procedures.

（应用领域）
该产品广泛应用于：自动化产线的工件到位检测、机床刀具位置监控、包装机械的物料计数、电梯平层定位等场景。其快速响应特性（≤1ms）可满足高速生产线的检测需求，内置抗电磁干扰设计确保在变频器、电机等强电磁环境中可靠工作。特殊表面处理工艺使传感器在潮湿环境下仍能保持稳定的电气性能。